Triple Chainwheel Front Derailleur

ok

This product does works well. It's actually precise and also shifts gear quickly!

Well constructed unit but be aware that due to the actuation mechanism being rather bulky at the rear it will not fit some bikes with limited clearance between the seat tube and rear wheel or mudgaurd.

Easy to install with various mounts for different clamp sizes. Shifting is light and easy

For me I could not get this to work, I have 22,32,42 crank set (btwin), but no matter how I adjusted it the throw just did not seen adquate to move across all 3 rings.

I have a brand new chain, new rear mech, and the crankset and rear cassette are only 1 year old.

I returned to my 13 year old suntour one and that works well (in fact the stoke is a little too far on that)

Mountain bike

Gear selectors shimano ST-EF29-8 / ST-EF29-L

изготовлен тайваньским производителем mikroshift. очень качественнле изделие на набор звезд 3х7/8. при сравнимом качестве с изделиями Шимано в два раза дешевле.

Used this to replace an old derailleur a coup[le of months ago that wouldn't adjust properly and was unreliable. Fitting was easy and it adjusted well. I used this on a bottom pull with a Shimano index shifter and it works well and reliably after it has been set up.

I also liked the add on adjustment shims in the clamp which allowed me to make a good fit to the stem.

I thoroughly recommend this and would say it is as high a quality as any other front derailleur out there at a bargain price.

I bought the front mech for my old road bike refubishment project (1985 Barry Hoban/Coventry Eagle) and found that the original front mech did not have enough travel to reach the large chainring. This MTB mech has loads of travel and easily helps the chain to swap between the chainrings. It is bulky compared to the Campagnalo mech that it replaced but does the job just as well.